diluent. These diluents have good compatibility with Kemlock adhesives and will not damage their original properties. It is not recommended to use water or other unsuitable diluents to avoid affecting the bonding effect.2. Dilution ratio: The dilution ratio should be determined according to the specific application scenario. Generally speaking, the dilution ratio can be adjusted according to the instructions for using the adhesive. If the adhesive is found to be too dense or has poor fluidity during use, the amount of diluent can be appropriately increased.3. Dilution operation: When diluting the Kroc adhesive, the diluent should be gradually added to the adhesive while stirring evenly. Avoid adding too much diluent at once to avoid damaging the structure of the adhesive.2, Application skills of diluted Kemlock adhesive1. Temperature control: When using diluted Kemlock adhesive, attention should be paid to temperature control. Generally speaking, the optimal temperature for the use of adhesives is 20-30 degrees Celsius. Using in environments with excessively high or low temperatures may affect the bonding effect.2. Humidity control: Humidity is also an important factor affecting the performance of adhesives. When using adhesives in high humidity environments, attention should be paid to keeping the bonding surface dry. Excessive humidity may prevent the adhesive from fully exerting its function and affect the bonding effect.3. Surface treatment: Before bonding, the surface to be bonded should be treated appropriately. Ensure that the surface is clean, dry, free of oil stains and impurities. If necessary, sandpaper or cleaning agents can be used to treat the surface to improve adhesion.4. Glue application method: When applying glue, attention should be paid to the uniformity and appropriateness of the glue application. Excessive or insufficient adhesive may affect the bonding effect. At the same time, it is necessary to ensure that the adhesive fully penetrates into the gaps to be bonded, in order to ensure a firm bond.Through the above introduction, we have learned about the dilution method and application techniques of Kemlock adhesive. In practical use, appropriate diluents and dilution ratios should be selected according to specific needs and environmental conditions, and attention should be paid to controlling factors such as temperature and humidity to ensure the bonding effect. Meanwhile, proper surface treatment and adhesive application are also important factors in improving adhesion. I hope this article can provide useful reference for you when using Kemlock adhesive.
Audited Supplier 
){kind=link}