With the continuous development of the market, the new generation of water-based liquid isolation agents has gradually replaced the old generation of isolation agents. This new product is dynamic A new type of excellent isolation agent is produced using vegetable oils as the main raw material, combined with scientific synthesis of imported intermediate materials and sophisticated formulas It has been widely used in the rubber industry, especially in the manufacturing of tires, and has received unanimous praise and recognition It can form a smooth cross-linked film between the tire and the capsule, thereby improving the demolding effect, increasing the number of demolding cycles, and extending the service life of the capsule. After the tire is demolded, its surface smoothness is high, and the appearance and internal quality are significantly improved. At the same time, it has low cost, no physiological activity, no toxicity, and no pollution. 2, Technical specifications: Fatty acid salts and derivatives Appearance: Dark amber transparent liquid Solid content: 30% PH value: 12.5-13 III. Purpose: 1 This isolation agent can form a very thin film of stearic acid salts on the surface of sulfurless rubber, which can prevent the adhesive from sticking to each other, thereby improving the number of times of detachment and demolding effect, and extending the service life of the capsule. 2. It can be quickly dispersed and dissolved in water, and has a good separation effect on the rubber material. 3. Can dissolve in hot rubber, and no traces of adhesive can be seen on the surface of the rubber when sulfurized. 4. Has strong lubrication, emulsification, and stain removal abilities. Compared with traditional soap water, it does not require heating and can be used at room temperature, with the advantages of convenient use, reduced labor intensity, and no environmental pollution. 6. It can better strengthen the adhesion between glue and glue, glue and curtain wire, glue and steel wire, effectively preventing the blockage of rubber mixing spray holes. 4, Dosage 1. Used for natural rubber refining, it is recommended to use Chuanao at around 1:20. The optimal dosage should be determined after experimentation. 2. Used for butyl rubber The recommended dosage is around 1:25, and the optimal dosage should be determined after experimentation. 3. For other types of adhesive, the recommended dosage is around 1:30, and the optimal dosage should be determined after experimentation. 5, Usage: Dissolve the isolation agent in cold or hot water according to the concentration used, pump it into the glue and inject it into the groove of the rubber product to allow the glue product to pass through, or directly pour the isolation agent into the groove in proportion. 6, Note 1: Only applicable to tires and black rubber products. Store in a ventilated, dry, and cool warehouse. Do not expose to direct sunlight, freeze, or mix with electrolytes such as acid and alkali. 3. Use plastic to poke and package every 50 kilograms. This product is non hazardous and has a shelf life of six months (from the date of manufacture). What should I do if the tire capsule isolation agent freezes on1. Using hot water with a slightly higher temperature for thawing, when the car's tire repair fluid is frozen and does not flow, the owner can take a pot of slightly higher temperature hot water and pour it on the tires. This utilizes the temperature of the hot water to make the tire repair fluid flow normally, which is a very effective method.2. Park the car in a place with direct sunlight. The temperature of the sunlight can make the tire repair fluid flow normally. Of course, this takes some time. If you are not in a hurry to go out, you can try this method. When the sunlight is strongest at noon, the owner can park the car in the warmest place, so that many parts of the car can thaw.3. Place the baking lamp on the tire and use the temperature it emits to restore the normal flow of tire repair fluid. Capsule release agent is a tire capsule coating agent containing silicone polymer. This product can provide good slip performance between the capsule and the raw tire, as well as good isolation performance after vulcanization. What are the main components of water-based capsule isolation agent for tires?1. The main ingredients are silicone oil and surfactants that act as emulsifiers, with certain stabilizers added. By using it, silicone oil can be compatible with water to form a uniform solution. Silicone oil acts as an isolation agent.
Audited Supplier 
){kind=link}